This is an original two slot cab that I brought back to life. 25" monitor looks great. Did a cap kit a couple months back and fixed the colors.
Replaced the sides with a glossy red vinyl. It is really bright. I messed up a little near the bottom, but I'm giving you enough of the vinyl to do one side over if you want. The T molding is new and in excellent condition.
Buttons and sticks are like new with not much use.
Anything that was metal (control panel, marquee frame, etc.) was repainted with gloss black.
New locks, keyed alike. Still need proper bar for the coin door.
Coin mechs work, credit LED's work, Speakers work.
Added steel corner protectors.
Fluorescent bulb starts and lights up. Doesn't go out (ballast ok).
Original serial number sticker still intact.
Did a little housekeeping inside the cab as well. New red vinyl on the inside and moved the monitor geometry controls to the sidewall.
As far as the four slot board goes:
Removed the original ni-cad battery and mounted a remote battery pack.
Comes with US and JAP BIOS chips.
Painted the steel cover gloss black.
Volume sliders work, no damaged components.
This unit comes with a jap Baseball Stars Professional and some misc. mini marquees.
Well, you can see for yourself in the pics.
Pic before I put the serial number sticker back on.
The Front
The inside
Pic before I tweaked the monitor and added corner protectors.
Here's a list of very minor bad things:
Very light burn-in of the credit counter on screen. You can only see it when the machine is off and you don't have the smoked glass in place. When on, the colors are great and the clarity is also great.
Missing a leveler foot on one corner. Stud is still there, just needs the foot.
Power supply works, but probably needs a replacement soon. Maybe it won't, but it just looks like it has been through the wringer.
There is a small voltage leak somewhere. Placing your finger in the right place on the control panel will give you a little tickle. I wanted to get that fixed, but it just didn't bother me enough.
I put a lot of work into this cab and would like to get $400 out of it with the 4 slot board and game. If you are only interested in the cab, we can probably make a deal, but any offers for the whole package will take priority.
I'm in northeast Indiana. This puts me about 3 hours from Detroit, 3.5-4 hours from Cleveland, 2.5 hours to Chicago (depending on traffic), 1.75 hours from Lansing, about 2 hours to Indy, and 3.5 hours to Columbus, OH.
It's Christmas, and I'm not at work this week. I will only be able to check my email and PM's once in a while. I will check them a couple times a day. Thanks.
Replaced the sides with a glossy red vinyl. It is really bright. I messed up a little near the bottom, but I'm giving you enough of the vinyl to do one side over if you want. The T molding is new and in excellent condition.
Buttons and sticks are like new with not much use.
Anything that was metal (control panel, marquee frame, etc.) was repainted with gloss black.
New locks, keyed alike. Still need proper bar for the coin door.
Coin mechs work, credit LED's work, Speakers work.
Added steel corner protectors.
Fluorescent bulb starts and lights up. Doesn't go out (ballast ok).
Original serial number sticker still intact.
Did a little housekeeping inside the cab as well. New red vinyl on the inside and moved the monitor geometry controls to the sidewall.
As far as the four slot board goes:
Removed the original ni-cad battery and mounted a remote battery pack.
Comes with US and JAP BIOS chips.
Painted the steel cover gloss black.
Volume sliders work, no damaged components.
This unit comes with a jap Baseball Stars Professional and some misc. mini marquees.
Well, you can see for yourself in the pics.
Pic before I put the serial number sticker back on.
The Front
The inside
Pic before I tweaked the monitor and added corner protectors.
Here's a list of very minor bad things:
Very light burn-in of the credit counter on screen. You can only see it when the machine is off and you don't have the smoked glass in place. When on, the colors are great and the clarity is also great.
Missing a leveler foot on one corner. Stud is still there, just needs the foot.
Power supply works, but probably needs a replacement soon. Maybe it won't, but it just looks like it has been through the wringer.
There is a small voltage leak somewhere. Placing your finger in the right place on the control panel will give you a little tickle. I wanted to get that fixed, but it just didn't bother me enough.
I put a lot of work into this cab and would like to get $400 out of it with the 4 slot board and game. If you are only interested in the cab, we can probably make a deal, but any offers for the whole package will take priority.
I'm in northeast Indiana. This puts me about 3 hours from Detroit, 3.5-4 hours from Cleveland, 2.5 hours to Chicago (depending on traffic), 1.75 hours from Lansing, about 2 hours to Indy, and 3.5 hours to Columbus, OH.
It's Christmas, and I'm not at work this week. I will only be able to check my email and PM's once in a while. I will check them a couple times a day. Thanks.
