Ault SC200 vs. SW300 Pinouts
- Thread starter Tsubaki
- Start date
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Possibly not, but with a Multi meter It should be easy to work out GND, 5 and 12 volts
Tsubaki
B. Jenet's Firstmate
- Joined
- Dec 30, 2003
- Posts
- 404
OK.
I found this definitive thread: http://www.neo-geo.com/forums/showthread.php?t=114650&highlight=Ault+SC200+pinout
It appears that the 5v and 12v are on the same pin.
The issue is really on Pin 2 and 4.
If I already have Pin 2 and 4 wired to ground wire on the inside of my MVS console, will I have issues if I plug in the SW300 instead of my sc200 (which I've been using )?
I found this definitive thread: http://www.neo-geo.com/forums/showthread.php?t=114650&highlight=Ault+SC200+pinout
It appears that the 5v and 12v are on the same pin.
The issue is really on Pin 2 and 4.
If I already have Pin 2 and 4 wired to ground wire on the inside of my MVS console, will I have issues if I plug in the SW300 instead of my sc200 (which I've been using )?
- Joined
- Oct 30, 2003
- Posts
- 34,075
Tsubaki said:
Nope...
When I wire superguns I wire all 3 to ground... THat way it will work with both psus.