MVS 2 slot and 4 slot PCB covers

Xian Xi · Nov 16, 2006

Can someone please tell me the measurements of the PCB covers length, width and height(top of cover to bottom of PCB).

Thanks

MKL · Nov 16, 2006

Length and width of the covers are the same as their respective PCBs, of course.

The smaller 2-slot and 4-slot are 39 x 28 cm. The bigger 4-slot (and probably also the bigger 2-slot) is 45 x 28 cm. The height of the covers is always 4 cm.

Xian Xi · Nov 16, 2006

MKL said:
Length and width of the covers are the same as their respective PCBs, of course.

The smaller 2-slot and 4-slot are 39 x 28 cm. The bigger 4-slot (and probably also the bigger 2-slot) is 45 x 28 cm. The height of the covers is always 4 cm.

Thanks a bunch dude.

werejag · Nov 16, 2006

there was 2 slot cover someone posted the dxf file to make it. it was about 2 months ago i belive

Murray · Nov 16, 2006

werejag said:
there was 2 slot cover someone posted the dxf file to make it. it was about 2 months ago i belive

That's in here. You can see the end result in my sig (victoly link).

I probably still have the dims around here for screw hole spacing / slot hole size if you need them though you could probably pull them off the drawing if you needed to.

werejag · Nov 17, 2006

well i was off it was last month

Xian Xi · Nov 17, 2006

Actually I'm not making a PCB cover, I am making something else.

werejag · Nov 17, 2006

do tell

Xian Xi · Nov 17, 2006

My friend makes dust covers and I am planning on making a few for 2 and 4 slots as well as other custom CMVS systems.

Here's what the graphic looks like on the cloth:

I thought of doing this since my CMVS slot is fully exposed so I end up putting a book on it to keep the dust out.

Let me know what you think.

werejag · Nov 17, 2006

if the dust cover is red with black trim and a black logo. that would rock.

i love the idea

Murray · Nov 17, 2006

werejag said:
if the dust cover is red with black trim and a black logo. that would rock.

i love the idea

Q4T.

Yeah, I hadn't mentioned mine because the question looked like you were building something around the cover, not replacing it. Just couldn't put my finger on what that would be, though.

Xian Xi · Nov 17, 2006

werejag said:
if the dust cover is red with black trim and a black logo. that would rock.

i love the idea

I'll ask if she can do it.

Magnaflux · Nov 17, 2006

If anyone could get me a dimensioned drawing, I could easily throw this thing in Inventor and get exact sheetmetal dimensions or a at least get some quality CAD drawings.

Don't worry, I can publish them in .pdf so anyone can open them.

Xian Xi · Nov 17, 2006

Magnaflux said:
If anyone could get me a dimensioned drawing, I could easily throw this thing in Inventor and get exact sheetmetal dimensions or a at least get some quality CAD drawings.

Don't worry, I can publish them in .pdf so anyone can open them.

I already narrowed it down to 18" x 11.5" x 1.75" as a medium between the 2 different sizes. The additional space is for panel mount jacks.

If anyone is interested in one PM me.

She has different colors available but for the graphic white is best as it has a white background on it. I was initially only gonna get one for my CMVS but I figured maybe other would want one too.

MVS 2 slot and 4 slot PCB covers

Xian Xi

JammaNationX,

MKL

Basara's Blade Keeper

Xian Xi

JammaNationX,

werejag

Galford's Poppy Trainer

Murray

Akari's Big Brother

werejag

Galford's Poppy Trainer

Xian Xi

JammaNationX,

werejag

Galford's Poppy Trainer

Xian Xi

JammaNationX,

werejag

Galford's Poppy Trainer

Murray

Akari's Big Brother

Xian Xi

JammaNationX,

Magnaflux

Onigami Isle Castaway

Xian Xi

JammaNationX,