Sound problem with mvs 2-slot

Ok so heres the deal, I was moving my cab inside before it gets to cold to play it outside, and when I got it in and all plugged back in there was no sound. I took the carts out and put them back in a few times to see if that would help and nothing. I traced the wires from tp to bottom and everything seemed like it was ok, so I went into test mode and under the sound menu it said the sound was off. I messed with it pressing every button and it just says off. any ideas on this???

In test mode it will always say off initially. Move the joystick down to left and then hit the A button, it should make some noise. Also verify the volume slider is not all the way down.

Scott

Yeah I did all that and still nothing......

yeah checked everything... the slider is up far enough to tell if theres any sound and been through test mode a bunch, if I move it down it goes to right speaker and if I hit a button I know it sound make a sound but it doesn't. I'm leaning towards somethings unplugged or nt getting power but I've been through the whle cab wiggling wires and checking connections, I think I'm gonna grab a multi-meter and check the speaker wires otherwise I on't know whats goin on.

have you lost the 12 volt supply to the mvs board ?

Problem fixed, it was a ground wire that came undone. I really need to anchor down my change drawer cause thats what was rattaling around in there and knocked the wire off but thanks for the help everyone.