kb9wvv
Overtop Pathfinder
- Joined
- Sep 22, 2004
- Posts
- 105
Weird situation. The 2 slot cab I'm restoring has the 25" RCA tube with QNIC board. I've noticed that the screen starts stretching vertically near the top 1/3 of the picture tube. You can easily notice it with rolling credits that roll from bottom to top. The text starts getting bigger near the top portion of the monitor.
I have the vertical size turned to where there is about 1/4"-3/8" from edge of picture tube to edge of image. That is to say, I do not have the image stretched vertically beyond the perimeter of the monitor's tube. It isn't extremely noticeable, but I can tell.
??????
Also, any tips on getting the white to be more white and less yellow-ish?
Was just going to mess with the color adjustments a little on the neck board.
I have the vertical size turned to where there is about 1/4"-3/8" from edge of picture tube to edge of image. That is to say, I do not have the image stretched vertically beyond the perimeter of the monitor's tube. It isn't extremely noticeable, but I can tell.
??????
Also, any tips on getting the white to be more white and less yellow-ish?
Was just going to mess with the color adjustments a little on the neck board.
