Need MAS Supernova DB-25 controller port pinout diagram

msu89dawgs

msu89dawgs

Hardened Shock Trooper
Joined
Feb 12, 2004
Posts
434
I'm redoing a supergun for someone who has two MAS 6-button sticks with the DB-25 connectors that connect to the SuperNova. I'm putting a CPS-1 kick harness in it as well. I've searched for a thread or site that has the pinout for the Supernova controller ports, but no luck. I've read that a sheet showing the controller pinouts comes with a SuperNova, but unfortunately the person doesn't have the SuperNova, just the sticks. If anyone can give me the pinout, or point me to a URL that has it, I would greatly appreciate it. I've even e-mailed MAS, but haven't gotten a response from them yet. TIA for any help.
 
T

thundr51

Bead Banger
Joined
Jan 22, 2001
Posts
1,490
I've got this at home (at work now). When I get home later I'll scan it and send it.
 
Cavalry

Cavalry

INfintido Innuendo?,
20 Year Member
Joined
Jan 17, 2005
Posts
1,914
straight from the paper that comes with the supergun.

25pinks7.jpg
 
msu89dawgs

msu89dawgs

Hardened Shock Trooper
Joined
Feb 12, 2004
Posts
434
INFintido - Thanks. This is looking at the front of the SuperNOVA, correct? I believe on the female DB-25 connectors, pin 1 is on the right if you're looking from the front. Obviously MAS doesn't pay any attention to the numbers on the pin connectors on the DSUB. Thanks again.
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
msu89dawgs said:
INFintido - Thanks. This is looking at the front of the SuperNOVA, correct? I believe on the female DB-25 connectors, pin 1 is on the right if you're looking from the front. Obviously MAS doesn't pay any attention to the numbers on the pin connectors on the DSUB. Thanks again.
Click to expand...

I always recomend using a Continutiy test just to make sure.
 
msu89dawgs

msu89dawgs

Hardened Shock Trooper
Joined
Feb 12, 2004
Posts
434
norton9478 said:
I always recomend using a Continutiy test just to make sure.
Click to expand...

Problem is, I don't have the controllers or the SuperNOVA. I'm wiring controller ports on a supergun for someone who has two MAS 6-button Street Fighter layout sticks that came with a SuperNOVA. I definitely do continuity checks on all my wiring, to make sure I have good connections. However, he's out of state, and I don't have access to the sticks to check the orientation of the wiring. I can see if he has a voltmeter or continuity tester, and if he can do the check.
 
Last edited:
NGT

NGT

J. M Club, ,
20 Year Member
Joined
Jul 20, 2002
Posts
4,762
msu89dawgs said:
INFintido - Thanks. This is looking at the front of the SuperNOVA, correct? I believe on the female DB-25 connectors, pin 1 is on the right if you're looking from the front. Obviously MAS doesn't pay any attention to the numbers on the pin connectors on the DSUB. Thanks again.
Click to expand...


that's looking at the end of the controller's cord.
 
Cavalry

Cavalry

INfintido Innuendo?,
20 Year Member
Joined
Jan 17, 2005
Posts
1,914
msu89dawgs said:
INFintido - Thanks. This is looking at the front of the SuperNOVA, correct? I believe on the female DB-25 connectors, pin 1 is on the right if you're looking from the front. Obviously MAS doesn't pay any attention to the numbers on the pin connectors on the DSUB. Thanks again.
Click to expand...

ya that looking straight at the front of the supergun. If you were standing behind it, pin 1 would be on the right.
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
Someone should just redo the pinout sheet with the real DB-25 pin numbers.
 
Last edited:
NGT

NGT

J. M Club, ,
20 Year Member
Joined
Jul 20, 2002
Posts
4,762
norton9478 said:
Someone should just redo the pinout sheet with the real DB-25 pin numbers.
Click to expand...


instead of 9-15, it's 14-20.
 
You must log in or register to reply here.
Top