Neobitz and supergun help

I was working on my supergun last night and I was able to get it up to where I could test the sound and test the neobitz encoder. Well luckily the sound works with no problems and the encoder works, but I am having problems with the picture. It will display a picture and I can play a game, but the picture has a bad red tent. Here is an example:


I tested it only on composite video and it was tested on a sharp aquos LCD TV. So my question is what could be causing the picture to not display the proper colors? Any help would greatly be appreciated. Thanks all.

There is no green, check continuity from the G to the encoder input.

Thanks for a fast reply.

Fixed! Thanks again.

CheapNeoGeo said:

Fixed! Thanks again.

Click to expand...

That is good news

BTW what was the fix ?

ttooddddyy said:

That is good news

BTW what was the fix ?

Click to expand...

There was some solder that had made a solder bridge to another pin at the Green pin on the jamma harness. I guess that can happen when you are working on it at 3 in the morning. Thanks again.