RGB-NTSC convertor, PSU, Unibios EPROM

I'd like these to be relatively inexpensive, I got a nice deal on an MV-1F, so I'm going to take the plunge and try to consolize it, since the investment risk is minimal. An older JROK or other comparable quality RGB-NTSC convertor will be fine; I'll be using the s-video output; doesn't need to have the output connectors on the PCB. I'd like a Jameco SC200 PSU. Finally, an older revision Unibios EPROM will be fine. If anyone has any of these components, please shoot me a PM. Thanks.

I can get you a Jameco PSU that has 25W output and will run all Neo games. I also make NTSC encoders and can make one to sell you. Check my site.

-Segasonicfan

I've sent you a PM.

The Neobitz-S DIY kit is exactly what you need. A professionaly produced PCB designed for the Neo.

Jeff

segasonicfan said:

I can get you a Jameco PSU that has 25W output and will run all Neo games.
-Segasonicfan

Click to expand...

Personally,

I'd go with something sleeker for the MV1-F....

A 5v @2000ma connector is all you need.

I pick them up from time to time at the Thrift Store.

Personally,

I'd go with something sleeker for the MV1-F....

A 5v @2000ma connector is all you need.

I pick them up from time to time at the Thrift Store.

Click to expand...

True, but don't you need +12v for the speaker amp?
I just use the 25W supply from Jameco cause it's dirt cheap ($9.99)

-Segasonicfan

segasonicfan said:

True, but don't you need +12v for the speaker amp?
I just use the 25W supply from Jameco cause it's dirt cheap ($9.99)

-Segasonicfan

Click to expand...

If you are consolizing... the +5v will power the headphone jacks....

Or so I've heard....