first time MVS onwer needs some help

R

ryanpkirby

Guest
I just purchased a MVS-4-25 (ver. 3) cabinet and I am having some trouble setting it up. Here are some of my problems:

1. adjusting volume (sound is very low and only works on the left side)

2. adjust screen brightness (screen is a little dark)

3. the hardware test screen shows some buttons are stuck on, what is my next move?

any other tips would be much appreciated, thanks for the help

-Ryan
 
N

Neo Collector

Raiden's Valet
Joined
Feb 26, 2006
Posts
1,104
ryanpkirby said:
I just purchased a MVS-4-25 (ver. 3) cabinet and I am having some trouble setting it up. Here are some of my problems:

1. adjusting volume (sound is very low and only works on the left side)

2. adjust screen brightness (screen is a little dark)

3. the hardware test screen shows some buttons are stuck on, what is my next move?

any other tips would be much appreciated, thanks for the help

-Ryan
Click to expand...

Ryan,

1 - Check the speakers and the wires to the jamma connector.

2 - You need to look for the bright and contrast bottons inside the cab, if messing with then doesnt help you might need to change the monitor, but im shure you will be able to help your self

3 - Open up the control panel and change all the switchs its a pretty easy task.

Alex
 
You must log in or register to reply here.
Top