Neo 6 Slot to use w/GW Supergun

M

MameMaster!

n00b
Joined
Nov 11, 2005
Posts
10
Hello!....I'm a long long time luker but I now have a question I'm sure one of you Neo Geo experts can help me out with!

I own a 6 slot board (I just got it) and as far as I can tell it works perfectly (i.e.- each slot works as I get video from each one when I put in a cart).

But, I am trying to use it w/my GW Supergun and obviously I'm not getting sound and I can't switch games as it's not Jamma standard pinout.

I was hoping that someone here would be able to whip me up an adapter (I would pay for it of course) to change the jamma pin out to MVS standard so that I can use it properly w/my Supergun. I've been told this is fairly straight forward...but I'm totally confused as to how to go about this exactly.

another idea is that I am seriously considering upgrading to the either the MAS supergun or the SIGMA RAJEN if you guys think that would make more sense and work more easily "out of the box" w/the 6 slot.

Any suggestions are sincerely appreciated!!!!

MameMaster!™ :help:
 
meanbean

meanbean

Armored Scrum Object
Joined
Aug 3, 2005
Posts
258
This modification/switch is usually done internally to your supergun so that the output sound from th rca jacks will reflect the stereo/mono mode. You can get stereo sound from the headphone jack on your 6-slot since you have a mono supergun setup.
 
M

MameMaster!

n00b
Joined
Nov 11, 2005
Posts
10
meanbean said:
This modification/switch is usually done internally to your supergun so that the output sound from th rca jacks will reflect the stereo/mono mode. You can get stereo sound from the headphone jack on your 6-slot since you have a mono supergun setup.
Click to expand...


thanks for the info.

Is it difficult to do? Do you know if either of the superguns I mentioned would work more easily w/the 6 slot?

Thanks!
 
You must log in or register to reply here.
Top