Now I'm Addicted to the help!

FAT$TACKS

Not Average Joe., Not Average Homeowner., Not Aver
15 Year Member
Joined
Oct 31, 2005
Posts
4,478
Everyone was so great helping me out with problem, I've decided to ask another question.

Okay I've a Neo-Geo one slot board in an old cabinet. It is not the original cabinet and I was thinking about taking the board out to put something else in the cabinet.

First off I was interested in the converting of the one slot board so I could play it on the television. I've looked around but not seen too much info to be able to get that done or figure how to do it. Anyone with any links that they could share would be great.

Secont I am thinking about that atomiswave system as something to put into my cabinet when it is empty. How much of an issue would that be. I know that is pretty much a wide open question so an answer something like... way to hard to be worth it or.. yeah it is pretty simple to do would be just fine.

Thanks again for taking the time to look this over.
 

Moose

Moose,
20 Year Member
Joined
May 3, 2002
Posts
1,353
Okay, first off, what type of NEO MVS board do you have? Depending on what you have can determine how much you have to spend to either consolize your system, or buy a supergun.

A supergun is a device that lets you hook your Neo right up and start playing. Consolizing your system basically is taking a supergun and speciffically making it "one" with the Neo Board.

So, you can either buy this...
http://cgi.ebay.com/SUPERGUN-Set-MA...oryZ3945QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Or talk to someone like JMKurtz, D-lite, or VARIOUS other members here who Im sure would be willing to consolize your board for not too much. Basically you need a video converter ($80-120) a Power Supply ($20-50) and the labor, and that depends. Member TerryMathews is consolizing my MV-1B right now.

Next, about your Atomiswave, any JAMMA board should go in and play without any problem. :glee:

Hope this helps. Ask all the questions you need here, were all pretty friendly.
 

kb9wvv

Overtop Pathfinder
Joined
Sep 22, 2004
Posts
105
As long as your cabinet is wired to JAMMA spec, then you should have no problem with the Atomiswave.

Don't forget about controls if you decide to use the MVS board on TV. You can either pay a rediculous amount of money for real neo sticks or build your own cheaply. Happ Ultimate 8 ways with heavy spring are only what, $10 or something?
 
Top