Whats the proper SCART(RGB21) lead hookup for a CPS2 to get clear video output?

F

FusionITR

Krauser's Shoe Shiner
Joined
Aug 18, 2005
Posts
243
Ok, first I had 220uf caps on the R G and B leads and the picture was extremely bright (as if the gamma were turned up to the MAX), and it was kinda blurry. So I removed the caps from the R G and B leads and now the picture is less bright (but still not bright) and the blurryness is still there.

What is suppose to be the proper configuration for an RGB21 (not european scart) lead?
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
Leave the caps.. But put a 500 ohm pot inbetween the cap and the scart connector.
 
F

FusionITR

Krauser's Shoe Shiner
Joined
Aug 18, 2005
Posts
243
norton9478 said:
Leave the caps.. But put a 500 ohm pot inbetween the cap and the scart connector.
Click to expand...

So put 500 ohm pot's between all 3 caps? What does the 500 ohm pot do? And is 220uF the correct capacitance I need for CPS2? I used 220uF for my snes and it works great.
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
Use three pots total. One for each signal.

The Cap boosts the signal and then the pot can be used to drop the signal.
 
norton9478

norton9478

So Many Posts
No Time
For Games.
20 Year Member
Joined
Oct 30, 2003
Posts
34,075
yeah....

1k will work....

Could you get something between 500-1000?

Or if you can get something greater than 350.....
 
You must log in or register to reply here.
Top