Removing restrictor plate in a sanwa

taitai

taitai

Genbu's Turtle Keeper
Joined
Apr 25, 2004
Posts
2,393
If I remove the center restrictor plate in my sanwa stick, but put the rest of that assembly back on, will it damage the stick AT ALL?

I ask this because the square restrictor plate feels weird in my sanwa and I'm not sure how long Himura will take to get me an octagonal...
 
zapatistab

zapatistab

Athena's Wardrobe Manager
Joined
Jun 14, 2004
Posts
2,284
taitai said:
If I remove the center restrictor plate in my sanwa stick, but put the rest of that assembly back on, will it damage the stick AT ALL?

I ask this because the square restrictor plate feels weird in my sanwa and I'm not sure how long Himura will take to get me an octagonal...
Click to expand...

Removing the plate will not damage anything. The only thing, you need the restrictor plate to keep the PCB/Microswitches in place. I don't fully understand your question, but as far as damage, you will be fine.
 
taitai

taitai

Genbu's Turtle Keeper
Joined
Apr 25, 2004
Posts
2,393
zapatistab said:
Removing the plate will not damage anything. The only thing, you need the restrictor plate to keep the PCB/Microswitches in place. I don't fully understand your question, but as far as damage, you will be fine.
Click to expand...

I should've worded that better.

the square part of the plate pulls out, I'm wondering if I'll damage anything by removing it.
 
taitai

taitai

Genbu's Turtle Keeper
Joined
Apr 25, 2004
Posts
2,393
zapatistab said:
No, the square plate is the same as the octagon plate.
http://www.himuragames.com/images/gty_01.jpg

You remove the whole piece.
Click to expand...

the square gate has a 4 way option(imagine my surprise when I put my HRAP into 4way mode and forgot then a day later playing CvS 2...), and a removed option.

i'm wondering if there's a downside to the removed option.
 
loopyeddie

loopyeddie

Ukyo's Doctor
Joined
Oct 30, 2003
Posts
1,204
You can't use it without a restrictor plate can you? I though it held the thing together?
 
taitai

taitai

Genbu's Turtle Keeper
Joined
Apr 25, 2004
Posts
2,393
loopyeddie said:
You can't use it without a restrictor plate can you? I though it held the thing together?
Click to expand...

on the restrictor plate, there's a square gate in the middle and it's removable. I wanted to see if there was any downside to removing it.

I just removed mine and everything's fine. n/m.

I'd still rather have an octagonal plate.
 
loopyeddie

loopyeddie

Ukyo's Doctor
Joined
Oct 30, 2003
Posts
1,204
Oh, I get it. Actually seporating the plate and the restricter itself! No, that should be fine.
 
taitai

taitai

Genbu's Turtle Keeper
Joined
Apr 25, 2004
Posts
2,393
Lashujin said:
I like square plates
Click to expand...
I don't.

it feels all weird when I'm trying to do QCF motions.

I need a octagonal plate because pushing the stick in any of the four cardinal directions in games Gundam vs Zeta is weird.
 
You must log in or register to reply here.
Top