Restoring carts

I've been buying a lot of chip sets & MVS/AES boards lately in the hope of restoring them back to fully working carts. I have the following chips:

Samurai 1 & 3
Fatal Fury Special
World Heroes 2

The following MVS boards:

PROGBK1 x 3(one with LS74, 2 without)
PROGGSC
CHA256 x 4

And these AES boards:

CHA256 B - SS2 chips on it
PROGLBA - KoF99 chips on it
PROGTOP2Y - SS2 - Never seen a 2Y before
CHA42G-3 - WH2?
PROGGS x 2 - SS1? FFS?

I know how to restore Fatal Fury 3 KoF96 & SS2, but these others would be nice to have in my collection.

for more answer : those board are MVS or AES ???

if its for AES , i can gave you the jumper setting and Resistor valor for WH2 and FFS

First post edited to include AES boards too.

WH2 :
need a PROG4096 , jump setting are
- jumper ON : J2 , J3 , J6 , J8 , J9
- jumper OFF : J1 , J4 , J5 , J7 , J10
- R1 = 472 , R2 = OFF
- PC1 , PC3 , PC4 , PC8 , PC9 , PC10 have a "jumper" ; other none
- C1 , C2 = ON ("jumper" like PC1)

on the CHA42G-3 Board :

- jumper ON = J2 J3
- jumper OFF= J1 J4 J5 J6
- C1 C2 C3 are off
- all PC are on execpted PC8 and PC7

attention : PC13 "jumper" is near to corner down left , on the top of the column of the C2 , J5 J6 C3

next game soon and soz for my poor english

FFS :

PROGGS , jump setting are
- jumper ON : J12 J5 J1 J7 J10
- jumper OFF : all other
- R1 = 472 , R2 = OFF
- PC all ON
- C1 , C2 = ON

on the CHA42G-4 Board :

- jumper ON = J2 J3 J5
- jumper OFF= J1 J4 J6
- C1 C2 C3 are off
- all PC are on

Damn! Can't make anything from those