mykockle
n00b
- Joined
- Jun 29, 2005
- Posts
- 36
Guys,
Need some guidance if you are able. Recently got my hands on a nice 4 slot cab, all original, real nice... Anyway in doing some work on the cab, and in doing some general tinkering, I noticed something odd. The mobo in the cab is loose and is not screwed down at all, also the screws (and I'm not sure on the real name) and long hex nut thingies are not installed the same way I've seen them on other mobo pics I have seen online... for example...
Here is a pic from hardmvs of my mobo... See the yellow boot like things on the bottom? Well, those are installed upside down, and basically, the mobo is resting directly on the wood inside of the cab, with nothing in between, which cannot be good. Any way... long story short... In order for me to re-install these correctly, I am going to need a whole new set of the yellow boot things, the hex nut things, and the screws that, err, screw it together
.
Does anyone know where I can get a new set? I need all the bits as the ones that are currently installed on the machine are a little on the dodgy side, and a couple of them are stripped and barely hanging on. For the love of god, someone give me a lead...
Thanks all...
Once I have the right name for the parts (and am able to take a pic or two), I will also add a request to the "wanted" boards for the parts.
Need some guidance if you are able. Recently got my hands on a nice 4 slot cab, all original, real nice... Anyway in doing some work on the cab, and in doing some general tinkering, I noticed something odd. The mobo in the cab is loose and is not screwed down at all, also the screws (and I'm not sure on the real name) and long hex nut thingies are not installed the same way I've seen them on other mobo pics I have seen online... for example...
Here is a pic from hardmvs of my mobo... See the yellow boot like things on the bottom? Well, those are installed upside down, and basically, the mobo is resting directly on the wood inside of the cab, with nothing in between, which cannot be good. Any way... long story short... In order for me to re-install these correctly, I am going to need a whole new set of the yellow boot things, the hex nut things, and the screws that, err, screw it together
. Does anyone know where I can get a new set? I need all the bits as the ones that are currently installed on the machine are a little on the dodgy side, and a couple of them are stripped and barely hanging on. For the love of god, someone give me a lead...
Thanks all...
Once I have the right name for the parts (and am able to take a pic or two), I will also add a request to the "wanted" boards for the parts.
