Older AES Console Video Bypassed Mod Help????

Ok, so I had a few probs with glitchy graphics on my AES, I thought it could of been the mod done by some guy who sold it to me on ebay. Bearing in mind that this was ok before hand.

Anyway this was the description on the auction I won:

Machine is a later version so the system has had the main video chip bypassed(as the later serial models had poor rgb quality) so this system only outputs rgb, but the picture quality with the mod is quite stunning.

Looks to me like some original resisters was taken off the board for this mod.

Anyway I did a really stupid thing and took the 4 wires off the back of the board withought marking where they go back to, so basically I have no Video or sound now

There was 4 wires:
Red
Black
Yellow and blue.

Below is a scan of where the wires were, if anyone can help me get them back in the right place it would be much appreciatted. If I dont get my neo up in action again im gonna get the drug like twitches


The wires were joined some some pins in the larger red box and the wires came from the 4 pins in the smaller area (small red box)

Thanks In Advanced.

Check out my topic on this here:
RGB bypass mod for Neo models 5 to 7
Pics n' everything else you might need

RockstarRunner said:

Check out my topic on this here:
RGB bypass mod for Neo models 5 to 7
Pics n' everything else you might need

Click to expand...

OMG you rock man, Digital cookie for you.

Yeah, there are a few really good items hidden in the tech support board, they need to be stickied, or linked in a sticky...
the bios pinout comes to mind
(http://www.neo-geo.com/forums/showpost.php?p=1202442&postcount=4)