Convert S-Video to composite?

Budd

n00b
Joined
Apr 15, 2005
Posts
29
Hello togehter,

I tried to get that composite working out of a s-video signal by putting the C and Y together, but it doesnt really work. I have found some documentation in the internet, they write: "Usually the chroma line (C) is passed through a capacitor and tied to the luma line (Y) after it is passed through a resistor. Usually 470 pF and 100 ohms." - but I only got some stripes on the TV, I also tried a bigger capacitor, but doesnt work. may anyone help me with this problem, or maybe give me some hint where to search to error?

thanks...
 

Amano Jacu

Charles Barkley
Joined
Sep 11, 2001
Posts
8,594
I've seen s-video -> composite cables packed with PC videocards with s-video out, I'm wondering if just using a cable like that would work? :conf:
 

Budd

n00b
Joined
Apr 15, 2005
Posts
29
yes, perhaps, I should search and get such a cable.

anyway: it'll be interesting to figure out, how that conversion works...
 

Lime2K

Host for Orochi
Joined
Jul 30, 2004
Posts
762
Amano Jacu said:
I've seen s-video -> composite cables packed with PC videocards with s-video out, I'm wondering if just using a cable like that would work? :conf:

I have one of those cables that came with my pc, and it's composite output looks like ass. Big ugly hairy gorilla ass.

(svid out looks sweet - 52 inch pac man, baby!)
 

Budd

n00b
Joined
Apr 15, 2005
Posts
29
it worked, thanks ttooddddyy,
but quality is the same, like the direct composite outcome form the chip,
->yes, like hairy gorilla ass...
I guess, I'll better only work with RGB TVs in future.
 

ttooddddyy

PNG FTW,
Joined
Nov 29, 2001
Posts
8,335
It will be the same quality.

Its difficult to make a silk purse out of a sows arse

The problem when you combine luma and chroma signals is that one will interfere with the other.

Video signals have frequencies from 0 Hz or DC to over 5 MHz.

The chroma sub carrier frequencies are 4.43 MHz(PAL) and 3.58 MHz(NTSC) , so they are clearly going to clash. To minimise this a band stop filter or trap can be used.

Good info on the topic here.
http://joule.bu.edu/~hazen/DataSheets/ColorVideo/Composite Video Separation Techniques.pdf
 
Last edited:

Budd

n00b
Joined
Apr 15, 2005
Posts
29
thank you, I will read a little,
if I get better results, then I'm going to let you know...
 

neo_X7

Disciple Of Orochi
Joined
Jan 5, 2004
Posts
3,285
Here is one.
http://www.radioshack.com/product.a..._name=CTLG_003_010_003_005&product_id=15-1238
15-1238.jpg
 
Top