NOOB just got his 1st Neo Candy Cab 29

Hey all,

Sorry for posting twice with tech questions, but as I'm new to this and so pumped up about it, I can't help it.

I just got a mint Neo Candy 29 and I have a 4-slot MVS. I have a couple of problems:

1) The sound is atrocious. I checked the harness and it's wired for mono. What i've done so far is I've taken apart the the connector that merged the wires from the left and right speaker into mono and hooked the left speaker directly to the harness, so now I have one functional speaker and nothing wired to the left channel. Where do I buy the wires to connect the other speaker to the harness for stereo sound and how do I do it?

2) I guess the question above answers most of this but: I need to wire the test switch and select buttons, right? How do I do that?

3) Is it possible to wire 2.1 computer speakers to the mvs? It would be sweet to have a subwoofer in the cab

Thanks to all that reply, you're making my nights!!

HardMVS

Go there it will answer your questions and congrats!

If you want to hook up computer speakers, it would probably be easier to use the headphone jack.

Well,

You can wire in a stereo/mono switch for your speakers.

http://dasfool.aroo.tv/SimplePlusSound.htm

Select button is easy, just run a wire from pin 26 or D to the select button and ground it from one of the other buttons. If there is no pin there, then just insert one. I suspect that it is already wired and you just have to trace it to the cp. Good luck & congrats on your cab !!

p.s.

Where did you get the cab from & post a pic if you can?