how do I center this monitor? pics

NGT

NGT

J. M Club, ,
20 Year Member
Joined
Jul 20, 2002
Posts
4,762
the picture is a bit off to the right...but there's only 3 dials on the back which I think are for r,g,b and then the tint and bright...

I couldn't find any other dials....

ideas?


Usually there are like 5 dials on the back of the metal board, but I didn't see any. It's

Dscn6583.jpg


Dscn6585.jpg


Dscn6586.jpg


Dscn6582.jpg
 
Last edited:
Q

Quazimoto

n00b
Joined
Apr 30, 2005
Posts
36
Dude there has to be adjustments on the actual chassis for the monitor...the green board under the neck of the board . There should be a hroizontal, vertical etc hold adjustments you can turn....BE CAREFULL not to touch anything near the neck of wires...you can get a very cool exhilarating shock which hurts RRREEAAALLLLYY bad!!!!!!!!!!! :oh_no:
 
Q

Quazimoto

n00b
Joined
Apr 30, 2005
Posts
36
Looking further at your pictures.....looks like there may be a another board off the Chassis that you can adjust it.....look at any wires coming away from the chassis...see where they lead to...may be a hidden board somewhere.......
 
ttooddddyy

ttooddddyy

PNG FTW,
Joined
Nov 29, 2001
Posts
8,335
18CA-02
what brand is that ?
there must be a horizontal shift/phase/hold or width somewhere
 
ttooddddyy

ttooddddyy

PNG FTW,
Joined
Nov 29, 2001
Posts
8,335
nice one. without those controls would be like being in a boat without a paddle
 
NGT

NGT

J. M Club, ,
20 Year Member
Joined
Jul 20, 2002
Posts
4,762
they are tucked about 3 inches behind the front of the monitor on the bottom behind that black cord and the metal frame that holds it on. I looked the whole thing over like 3-4 times before I found them,lol...



yeah...18CA-02


not sure what brand. It's really hard to look at since the back of the cab doesn't open,lol
 
chris1

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
NGT said:
turned out looking nice

http://img.photobucket.com/albums/0903/cossackred/Dscn6591.jpg
Click to expand...




Late to the game..


Sweet Bro..Looks Great!!

Your MVS-U4 should have that same adjustment,monitor plate.

I was lucky to find the plastic tool used to get to these adjustment pots siting in the bottom of my Candy Cab..
Those pots can be a bitch to get to..

As seen in this pic..(if you can get one of these buy it..it was a big help)
NOTE:..You may have one in the cab somewhere as I didn't find it until I was doing a major clean-up inside the cab..
2004_0923_152826AA.jpg
 
M

MrLonghair

Morden's Lackey
Joined
Jul 27, 2003
Posts
350
Lucky. I have to lie down on the floor and reach a whole arm in to tweak monitor settings on my MV25-UP :/

Cute little cab
 
NGT

NGT

J. M Club, ,
20 Year Member
Joined
Jul 20, 2002
Posts
4,762
are those plastic?
 
Last edited:
You must log in or register to reply here.
Top