MK2 pcb issue's
- Thread starter racecar
- Start date
SuperGunGuru
Galford's Armourer
- Joined
- Jan 19, 2004
- Posts
- 458
Sounds like it's more an issue with the Supernova than the MK2 pcb. Does the Supernova have any adjutments for the picture? On my HGA supergun, some of the PCBs won't display right but will work fine in a cabinet. It's probably because my system has a crappy video encoder.
El Maricon Loco
Galford's Poppy Trainer,
- Joined
- Apr 23, 2003
- Posts
- 3,513
I've had probs with some arcade mobo's that just won't sync up with older monitors, don't know the supernova/supergun side of things..
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
This is common with MK boards with some encoders, AD do not work, Sony do (like in the jrok)-or so Im told. I have the same prob with my supergun.
ttooddddyy
PNG FTW,
- Joined
- Nov 29, 2001
- Posts
- 8,335
Reznor007 said:
The TV will sync to what the encoder outputs, thats where the problem lies imho.
Some encoders do not like 53.2 Hz frame rate. 50 or 60 they are designed to handle.
Its a different story if your TV accepts rgb of course.
- Joined
- Apr 11, 2003
- Posts
- 914
it is the pcb but not in a way its bad.
all the mk boards i have act the same way on my wega, nba jam will do the same thing. hell even the bootleg ver of mk1 would roll.
some tvs i tried mk1 is black and white.
but they work on other tvs.
all the mk boards i have act the same way on my wega, nba jam will do the same thing. hell even the bootleg ver of mk1 would roll.
some tvs i tried mk1 is black and white.
but they work on other tvs.
