Atomiswave/Supergun/Amp Question

I'm getting Neowave for xmas so I'm going to hook up my AW to my plasma (via VGA) especially
Anyway, my Supergun has a built in mono speaker and a 3.5mm out so I'm planning on switching the speaker off and hooking up to my Denon receiver with a 3.5mm jack -> 2 phono lead. I'm assuming I'll still get mono but I can't be bothered getting a lead to connect to the AW for stereo, and it'll sound a lot better than the SG speaker anyway.
Basically, I heard you have to be careful which amp/speakers you use with Supergun/JAMMA stuff (something to do with amplified sound) so I'm just double checking I won't blow anything up. It's a 110W pc amp IIRC so I'm guessing it'll be fine , but I just thought I'd double check as it wasn't cheap.

Cheers

I'm pretty sure theres a stereo jack output , so you can use a stereo jack to phono lead and whack it straight in the back of your amp

it would be nice for someone to confirm what connections there are thankyou please

There's no standar stereo jack output in the AW, you can get mono sound from the JAMMA harness or stereo from a small connector next to the VGA ouput.

About the amplified sound, well, I've connected the sound from the JAMMA harness to my TV and my stereo equipment and it worked well without blowing anything. There's a control volume tuner in the mobo, just remember to have it low just in case.