View Full Version : Neo Geo Tech Support
- I want to play Neo Geo on my TV.
- 6 slot stopped working
- Where to buy NiCad battery for MV-1FS
- Crisis Zone arcade monitor, Colors are a little... RED.
- risers / feet
- 2 Slot Video Oddity
- Earthing a chassis
- Suitable volume control for cab
- Removing pins from amp up connector?
- Sega MD cartridge-german to enlgish version rom
- no sound on cps2 game
- Best way to drill non-circular holes in a plastic project box?
- MVS: not horizontal size control
- Gun only shoots in the middle...Help
- PCB Graphics issues - where do I start?
- Naomi - VT boot issue
- Capcom big blue cabinet, paint question
- NOOooo! My REI says INVALID SIGNAL FORMAT
- 1084S-P help with back connections
- Candy Cab issues
- how could you fake a load in a cabinet
- Does anybody know the speaker size in a super new 29?
- How do I fix a bad trace on a PCB?
- Bad Video RAM on four-slot...
- neo through hdtv?
- neo through hdtv?
- Best Current TV for Retro Gaming...
- Does anybody know a RGB to s-video converter that has BNC/VGA inputs?
- need new astro city part#, want to make low/med res switch
- Scored Amazing Craigslist deal on old pro monitor, RGB pinout question.
- Cross Hatch problem on a single slot MV 1F
- Toggle Blood: Unibios VS Debug Bios
- 4 slotter no go even after fixing CN10
- Monitor H Frequency/Hold issues
- WANTED : Someone to repair sound on NEo Geo 6 slot PCBS
- Naomi on a MVS Cab
- Solved! HDTV Blocks Component Wii VC Games
- Can you change game during a game?
- flicker resetting problem on mvs
- red test buttons?
- Cartridge sitting on MV-2F
- monitor cleaning advice
- Is there a settings or option mode for MVS carts? kof2k2
- 27C4000 OTP Chip
- Cable connecter help needed
- Neo AES Component Kit?
- Cable connecter help needed
- PGM - Knights of Valor
- WTB: 28/56 JAMMA Fingerboard Splicer
- adjust sound on non Neogeo board in my Neo 29 cabinet
- Incorporating Atomiswave Samurai Shodown 6 into Neo cab
- WTF has been done here
- NeoBitz + XRGB-3: Will it work?
- what type of data cables does the MV-IC memory card reader use?
- Playchoice 10 -> Jamma Cab Project. Video Help
- Problems with blurred edges on neo geo cabinet monitor.
- Is there a prefered 1 slot to use in a jamma cabinet?
- Recapped audio section. Strange results.
- Advice about speakers on MV-1F supergun setup
- Consolizing Atomiswave Guide?
- Super Neo 29 -5V can it be added?
- 360 dvd drive replacement..question
- MV-2F Consolizing complete! (sound issues)
- 5V@?A for 6 slot MVS
- Monitor problems
- Video stability issues with NEO-BITZ on 2 slot CMVS
- Tekken 3 buttons
- CPS2/CPS1 flickering problems
- Jammaboards MVS to JAMMA adapter
- I think the flyback in my monitor is going out
- Who can drill a control panel?
- MV-2F annoyances (board appears modded)
- Neo Geo AES RGB SCART Ghosting Issue
- Please delete/lock
- AES with black/white scrambled video
- CDZ System -- cd drive never spins up
- What the heck is this... ? It's a video amp!
- Question installing unibios
- Atomiswave input problems
- Super MVS Converter II - Sound Issue?
- Tri Sync VGA issues
- What do I need to get into a toploader's PSU?
- Anyone ran 108 in 1 yellow Multi Cart with Super MVS converter 2?
- Introducing: TheSuperGun.com
- Point Blank Namco PCB No sound...
- Very low sound on cmvs
- A question about these speakers
- remember my stupid mvs u4 problem?
- RGB to S-video encoders
- Sega System 32 Sync issues question
- monitor apt pot means?
- Need help to troubleshoot a possibly dead MV-1FZ board
- Can you hook Atomiswave into MVS neo set up?
- cart gibberish with pics
- RGB to s-video / composite idea
- MVS 4 Slot No Boot Screen?
- Mvs cabinet problem
- New Astro City+HNG64 medium res question
- Bought a used X-RGB2+...problems :(
- Daraku Tenshi in a neo.
- my modbox is being weird
- Problem with first player start button, Mame+Unibios 2.3o
- -5 volts question?
- Do Colored Dots on a CPS-1 PCB Mean Anything?
- (solved) MVS-2 + Unibios 3 : player one cannot select character ?
- MVS cab speaker replacement
- 150 in 1 mvs cart on aes problem help
- Consolized MV-1B
- Color washout in corner of monitor
- Supergun: pinkish color
- Consolised MVS SCART Problem
- Need info on monitor MS2933?
- marvel vs capcom 2 naomi help :(
- CPS2 clips...
- Value of particular pots?
- MVS NGP Daughterboard
- Makvision 25" Tri-Mode Monitor CGA/EGA/VGA
- mvs u4 monitor chassis cap kit and mv6 cap kit
- Consolization - RGB to NTSC converter
- Peter Chou PS
- short between buttons 3 and 4?
- MVS carts that just dont go...
- MVS single slotter no go, worth repair?
- mvs fz help
- Work RAM test...
- pinouts for top board on first gen 4 slotter?
- CMVS only works on 1 of 2 TV's.
- 2-Slot CMVS Cart Select
- PS3 Repair Recommendations
- Noob help (stereo vs mono)
- Help - Power/Stby LED Circuit on consolized MVS
- more mvs cabinet problems
- Anyone know about projectors?
- Willow CPS1 'Inverted' Colours
- DIP-SW 1 OFF !!
- replacing the T-molding on a 2-slot big red cab
- NJM2267D
- World Heroes 2 Jet on CD, missing text?
- New! - Last CMVS Questions
- Alien vs Predator
- Samurai Shodown Screen Issue
- MVS PROBLEM! HELP PLEASE !
- NEO-MVH SLOT1F wierd sound issues
- billabs monitors twist SOLVED!
- MVS 4-Slot, a JammaBoards converter, and a bit of WTF
- jamma genesis help
- MV-1C sound output...
- Replace master crystal in AES to fix sync issues
- Forget this thread
- 6-slot Jumbled Text Issue
- Inline VGA capture thiggermajig
- Hyper Street Fighter II needed (urgent)
- 6-slot Replacement Battery?
- MVS blue (cyan) screen, please help is needed
- Chip Source
- Video RAM Error MV2
- 6-Slot - WTF
- Marquee lamp assembly?
- Proper PSU replacement for MV-1?
- PS3 CRT input lag?
- RGB output on AES and CD
- Tokens/Quarters
- Opinions on Cypress RGB-YUV converter
- Creating a multi-system MVS cab using a multi-slot Jamma PCB
- RGB-S straight off the MVS board
- Sony PVM Monitor question
- NAOMI Videos, comrade, moving picture wideos!
- CPS3 Changer Station
- 150 in 1 glitch problem solved
- Capcom I/O board issues
- MOTW Dip Switch Menus
- +5 for optical joystick
- 5 volt mod, older style MV2
- Aes kidney shape controller
- dreamcast to nano ms8/26su switchable rez
- Gaming Setup Advice Needed
- Can Someone More Experienced Look This Over?
- MVS repair!
- how to wire Wei Ya power supply
- how to wire Wei Ya power supply
- Stick build questions/joystick recomendations
- Arcade Light Gun Troubleshooting
- Need help with MVS 2 slot cabinet
- Micomsoft questions...
- Unibios 3.0 cheats that cause problems.
- Neo Geo CD question
- Hyper Neo Geo 64, Identifying board type.
- Fast Striker MVS problem
- Backup ram capacity mod?
- How to test a monitor?
- Do lithium batteries leak?
- Corroded contact
- scart to PVM help
- XBox 360 (Falcon) No Video
- Odd problem with a 1 slot MVS mobo - any help appreciated!
- Replacement 19 inch monitor for MVS?
- rapid fire buttons?
- New Neo home system, shakey video
- Neo memory cards with a MV-1B
- Neo Geo Arcade Machine Question
- Namco Gun Con2 issues
- AES missing/distorted sprites
- Help! - Scrambled picture on 1-Slot MVS
- CPS-1 Sound Problem
- Kick Harness Adaptors
- Select button stuck on
- Original Neo stick wire colors/color code
- How to deal with this label
- X68000 Games Sound but no visual what can I do about unsupported resolutions?
- TV problem
- Memory Issue with my 6-slot? Need battery?
- MV-1F Bank Error *FIXED*
- MV1-FZ Stereo Mod Question
- MV1FZ won't save scores (not battery)
- DB15 Female-Female cables?
- Sound out in cab.
- multi console arcade joystck
- MV-4FT2 MVS 5 volt mod?
- Red Screen - help with pins
- Jamma to Neogeo mvs
- neo geo aes
- Super scratchy sound on MS4
- The Phantom-1 Guide
- CAPCOM Stereo AMP QUESTION.
- Help needed troubleshooting Midway Sportstation joystick issue
- MVS Bust-A-Move problem
- Dual Jamma switch question (neo geo related)
- Couple questions about adding "D" buttons
- A Question about a PGM motherboard
- US-based Board Repair Service?
- need ngpc ext port pinout
- RGB to NTSC Video Encoder for Med. Res.
- MV-1C MVS audio
- 5V Mod resistors
- A few questions about the Electrocoin Arcade
- Sanwa Microswitches
- Eprom repair!!Some problems...
- Any Panasonic Tau owners?
- SH3 Board Colour Issue
- Unibios Checksum - Metal Slug X
- The Disaster Thread
- Sepergun HDMI output?
- Sanwa wiring issue
- PCB questions needed answered.
- DB15 Female connector mounting dimensions
- Would a scart vogatek MK 3 supergun work on US tv's?
- CPS3 in or out.
- Yet another 4-slot problem...
- CPS1 rainbow effect
- forgotten worlds genesis/md help.
Powered by vBulletin® Version 4.2.3 Copyright © 2021 vBulletin Solutions, Inc. All rights reserved.