View Full Version : Neo Geo Tech Support
- Using my MVS cabinet for JAMMA
- Multiple MVS Cab Issues, Please Advise
- CPS3 - how long do the batteries last?
- Atomiswave Metal Slug 6 issues
- Questions on a Die Hard Arcade cabinet
- NEC SuperGrafx RGB UN-mod?
- MV-IC Dimensions
- Basic CPS3 set-up instructions?
- WTF, help me identify this AES mod (pics)
- Un-consolizing a 2-Slot
- Anyone know what this is called and if I can buy it?
- No video on my CMVS. Life is cruel...
- Neo Bitz component poor video
- RGB Troubles with Play By Play
- MVS 1-slot (conversion?) Joystick Repair question(s)
- Jamma pins 27 & 28 + xbox -> jamma adapter
- coin mech light
- Backup RAM Error after battery removal
- sega dreamcast question
- Video ram error
- coin mech light #2
- MV1-F with 2nd player button short
- SNK Vs Capcom SVC Chaos with sound issues
- CPS2 19xx, green yellow orange booting screens
- Egret 29 monitor removal..
- Neo Geo Cleaning Tips.
- Suggestion on Video Encoders
- Decent video capture device.
- Game EX running on Atomiswave SD
- Metal Slug 2 garbled audio
- PS3 blueray drive swap?
- Need help with an mv1c
- Need some help with mv1c
- Help me identify this conversion cab....
- Help building an RGB supergun
- Nanao MS8 Monitor Issue
- Consolizing a Sega STV
- TMNT swap which ROMs from 2p to 4p board?
- Dead MSX cart, Altera IC?
- Wavy top of the screen on RGB tv/monitor
- Hori Fighting Stick NeoII (joystick, micro switch replacement)
- Capacitor question?
- Kortek Chassis keeps blowing fuses
- Wavy monitor-Help a noob out-Please
- FOUND: Neo CP button layout w/measurements
- HELP, adding a 6 slot to a 1 slot Super Neo 29
- Help make sense of this electrical diagram
- TMNT 4-Player cab owner help!!
- Konami Teraburst RTC Self check error
- MVS MV-1A Board help
- V-Liner I need help
- Need a Soldering mod - Neo-PC/PSX
- n64 component mod?
- Atomiswave Network Adapter
- Cleaning this board, any advice? New questions added
- Atomiswave SD screen flickering issues
- (XianXi/MKL etc) Gamesx Neo-Geo RGB pinout.... incorrect?
- HNG 64 powered by a SC200 ac adapter
- XRGB/XRGB2 Power supply (not the 2+)
- Neotropolis - Another Hybrid MVS/AES system?
- Super Pang PCB problems
- How do the super neo 29 LCD screens work?
- Astro City - MVS MV-1C
- Konami TMNT PCB bad image
- Atomiswave weirdness
- Headphone Jack Sticker for MVS-4-25 (ver. 3)
- Quickey: Can the Neo Geo use a Standard Res Monitor?
- Soft-Dip Saves
- Mega CD2 lens
- Hex editing, NVRam, Eprom burning
- Modding a Pelican Real Arcade Playstation 2 stick
- Anyone got a MVC cps2 board?
- I've got a missing cap on a Taito F3... looking for cap value
- fully wired JAMMA extension
- Rastan P1 button 2 doesn't work
- Metal Slug 3 only playing in Japanese mode, even when set in USA Arcade mode?
- Pit Fighter Board Issue
- NeoGeoCD or CDZ
- Cleaning and preparing a MVS 2-Slot
- In The Hunt PCB issues
- 4 slot woody powersupply issue
- Atomiswave meltdown - Xian, channelmaniac, anybody... help!
- composite vs s video on n64
- Video unstable on consolized MV-2F
- I want to make a consolized Atomiswave
- MV1FZS with z80 error?
- Which Eprom programmer for Jamma and Neo Related Stuff
- Taito F3 board - perfect picture... no sound
- neo geo cd boot black screen
- Supergun project
- Problems with Waku Waku 7 Crashing
- Headphone jack on 4 slot?
- Upgrading the Joysticks
- XRGB-3 with Japanese NeoGeo - some sync problem? how to solve?
- Neo Geo Controller Pro Button replacement
- Daytona USA LED Mod Question
- LED color coded pushbotton wiring.
- Double Dragon board issue - 1028 IAM resistors?
- Need a 80ns 27c322, one of you guys have one
- MV1A Odd Problem - FIXED!
- Neo Geo CD problems :(
- Final Fight minor sprite/object issue
- s video to hdmi upscaler on n64?
- Looking for Sega CDX repair service
- Atomiswave Horse Racing Manual: Anyone have it?
- HNG64 non-jamma power harness, how to build/where to buy?
- JROK wiring question MVS
- Help with CP on unknown cab
- S-Video Switch
- Question about a Samurai Shodown 4 MVS Soft Dip setting....
- Will it fit?
- Fume Extractors
- Weird Monitor problem?
- PC Engine CD stopped reading discs sad panda
- Looking for 5 volt on MVS cab
- Sound issue with a Mv-2F (?)
- Opinions on consolizing?
- Blasteroids Monitor/PCB help!
- ROM CRC Check
- simple jvs questions...
- AES console care?
- Emulation: Suppress green-colored pre-bios?
- Confirmation on dead PSU
- Neo Candy Marquee Questions
- UMKIII Static on Screen
- Is this Japanese 21 pin or Euro Scart???
- Question about components vendor
- Recapping monitor board
- Phoenixed Shinobi Sega System 16 - video/sound problem [HELP]
- Audio driver for Atomiswave - cap kit possible?
- Wiring diagram for a Mad Catz ST IV tournament edition stick (round 2)
- Quick question about monitor resolutions for CRTs
- Coin Mechanism
- Questions about grounds and electricity
- JROK working to not working
- Power issue
- Big Red Monitor(Red Cap) Issue
- Trying to make a boot boot (metal slug)
- Trying to order capacitors.. I'm so lost.
- Monitor tech Los Angeles area
- Linear Flash Vs. ATA Flash (PCMCIA) *Konami System573*
- MV-1C sync issues
- 2 slot /no sound
- Atari Jaguar Homebrew
- Getting a white monitor
- Astro City Monitor Issue
- Neo Candy 25 monitor issues
- JVS kick buttons not working... does it need power?
- should the glass in my mvs cab be tinted?
- Neo Geo 4 Slot Repair Log
- sega naomi jvs pinout
- Quick CPS2 Phoenix Question
- Broken slot on 4-slot board?
- vert lines in my mvs monitor...
- Sengoku Ace cap
- Not another top loader neo geo cd with dead lens
- Thorough MVS board cleaning / testing procedures
- Anyone got a DB15 Punch?
- Where to start fixing a bad jamma board?
- 150 in 1 cart freezes in some games
- Neo AES Serial number questions
- "Classic Joypad Converter Version NEO" pinout
- NVS-4000-01 PSU WTF? Or: How do I wire up this PSU?
- CP carriage bolts for Blast City - Found
- NEO GEO AES
- Tatsunoko vs Capcom: What is this?
- Missing Test Switch for MVS Cabinet
- Just Got Naomi Setup and Cant Get Picture Or Audio! HELP
- Naomi GDROM Setup pics
- Do boots work on the super converter 2?
- 4 Slot MVS will only read one cart at a time
- Monitor Static/Distortion issues - DDRSolo Cabinet
- Recommended places to purchase eproms?
- monitor curvature help with PICS
- Broken Japanese NGCG
- Arcade Stick modding - Dualshock 2 confusion
- MVS in a SFII cab?
- ISO USB NAND Flash Programmer, CFI
- Need pictures of a neo candy psu
- Looking to make a decent stick to use with NES/SNES
- Anyone with a 4 Slot Neo Geo board and a multimeter?
- SCART/JAP21-PIN Converter
- CPS2 Dungeons & Dragons problem
- Monitor Repair in the Raleigh NC?
- xbox 360 back compatibility
- PAID Request: Zombie Raid rom hack
- Did I break my monitor?
- NEO AES- Fixing (soldering) a screwey DC IN port
- Alluminium cover plates for MVS 2,4 and 6 stot motherboards
- Small surface mount push button
- CPS2 Gigawing question
- CPS1 Sync Problems
- Anyone have volume issues with Metal Slug?
- RGB mod= no composite video?
- MV-2V rgb question
- NAOMI Backup RAM Error
- Monitor took a dump.....
- Degaussing wand recommendation
- need a fz1 3do cd drive (the laser drive shaft) pic inside
- Do Y-Unit boards use the same audio cable as T-Unit ones?
- AES Power Supply - Equivalent
- Replacement for joystick parts?
- New Project: MV-IC Replacement? edit: New Projects KE 4 player and Jong Controller
- Model 2 compatibility/newbie question
- MVS Cab Freezing When All Slots Loaded
- Odd Neo Geo issue
- wei-ya tri-sync chassis unresponsive to horizontal width and pincushion adjustments
- Weird Sega Genesis Issue, need help.
- A little help with a switch
- Just recapped a monitor and I get nothing
- My fixes for buggy multislots
- Looking for Gunstar Heroes Region Unlock Code
- C844G Op-AMP
- Best powered Video splitters??
- Do MVS multigame carts harm the cartridge slots?
- Need Help with a SEGA Sys. 16 ALTERED BEAST Graphics Problem
- Need help with power supply
- J-PAC users, I need help! Insert coin shortcut?
- Installing Playstation controller ports in a JAMMA cab
- pal to ntsc
- Neo ac adaptor issue
- Issues with JROK component?
- Goldie Cab Monitor issues
- What Causes this on the AES?
- Question about audio output on 4-slot
- Tated CRT's
- Good stuff so far, need more cabinet help
- Any mods for sound control?
- Speakers making a raspy noise?
- Coin cell battery holder for 4-slot MVS
- goo-gone + bluray/dvd top=?
- Blurry MVS screen
- sourcing a good replacement monitor
- Wire routing for a consolized 4-slot?
- Cabinet shocks
- WG 25K7401 not displaying red color
- Anyone ever seen this overlap issue?
- quick easy jamma genesis adapter question
- Game won't show in rotation in 4 4slot MVS
- 4 Slot with Hantarex Polo video issue.
- Anyone know how to adjust the Power Supply output in an Exceleena 2?
- Flashing Video on Snow Bros Pcb
- How to Reset High Scores for MVS
- Monitor still lines and circle motions
- MVS 2 slot with credit readers
- Where to find a 1-1/8" knockout punch?
- Is it true that Naomi 2's don't need a GD-Rom PSU?
- Adding a Naomi and Atomiswave to an MVS cabinet
- Wiring a Neo controller to a non-common-ground PCB?
- Shock Troopers- versions A and B?
Powered by vBulletin® Version 4.2.3 Copyright © 2021 vBulletin Solutions, Inc. All rights reserved.